Mottech Soil Moisture & Temperature & EC Sensor
Overview
Mottech Soil Moisture & Temperature & EC Sensor is integrated the moisture, temperature & EC measurement
The stainless steel probe is inserted into soil surface or soil profile to test quickly. The product with temperature compensation to ensure the accuracy of measurement. Mottech Soil Moisture & Temperature & EC Sensor is integrated the moisture, temperature & EC measurement. The stainless steel probe is inserted into soil surface or soil profile to test quickly. The product with temperature compensation to ensure the accuracy of measurement. The probe can be permanently embedded underground and be connected directly to any controller in Mottech’s system via Mottech Smart Card (Version 2).
Download Datasheet
Enter your details to download
Selected Features
Applications
- Agriculture irrigation
- Greenhouse
- Grass farm
- Environment monitoring
- Water conservation
- Soil testing
Technical Specification
Range
Moisture: 0-100%°m3/m3° Temperature: -30°-+70° 0-10mS/cm EC: 0-10mS/cm
Accuracy
Moisture: ±2%(0-50%), ±3%(51-100%) Temperature: ±0.5° EC: ±3%FS
Output Signal
RS-485, 0-2V, SDI-12
Response Time
<1s
Supply
5VDC, 12-24VDC
Effective measurement area
With the center of the probe diameter is 70mm, high 70mm cylinder
Housing
ABS
Dimensions
45*15*145mm( probe:3* Ø3*70mm)
Operating Temperature
-40°-+80°
Ingress Protection
IP68
Storage
10-60°@20%-90%RH
Probe material
316L stainless steel
Code
M.SENS-83-SDI
Dimension
Mounting
- Testing medium should be with uniform intensity.
- If surface soil water content measurement, the sensor should be insert into soil vertically. Do not shake the sensor when inserted, otherwise the probe will be blended;
- If multi-layer soil water content measurement, the sensor should be buried in the soil and parallel to the ground. Make sure the probe not be blended;
- When removing sensors from the soil, please hold the sensor housing shell and do not forcibly pull on the cable. Soil on probes should be brushed tightly.
- Please keep the sensor in dry & clean conditions.
